Each study follows the same structure: the process as it ran before, the constraint that triggered the project, what was installed, and the result measured on the same parts.
Publication rule. A study is published only after the customer approves the text and the numbers. The cards below show the structure; customer name and measured values to be added after approval
Structural fabrication, thick plate
project title to be confirmed
Before
Manual MIG on long H-beam seams with rework on fit-up gaps.
Installed
Robotic cell with seam tracking and a two-station positioner.
After
Fewer rework hours per shift; distortion measured on the same fixture.
Cycle time
measured value pending
First-pass yield
measured value pending
Sheet metal enclosures
project title to be confirmed
Before
Visible weld marks and post-weld grinding on thin coated sheet.
Installed
Fiber laser welding with dedicated clamping and gap control.
After
Cosmetic seam accepted without grinding on the pilot batch.
Cycle time
measured value pending
First-pass yield
measured value pending
Tube assemblies
project title to be confirmed
Before
Changeover between three part numbers took most of the setup time.
Installed
Rotary positioner with recalled programs per part number.
After
Changeover measured as fixture swap plus program recall.
Cycle time
measured value pending
First-pass yield
measured value pending
What every study includes
The original process, including the rework it caused
The constraint that made the project necessary
Cell layout, fixture and process choice, and why the alternatives were rejected
Measured cycle time and first-pass yield on a pilot batch
What the customer would specify differently next time
Have a part that behaves like one of these?
Send it in. The trial weld report uses the same before-and-after structure, so you can compare it with your current process.