Free trial welding and video report

Before a cell is specified, the process has to prove itself on your part. Send the samples and we run the trial, record it and send back what actually happened.

1. Send the samples

Two to five pieces per joint type, cut and cleaned as in production. Include the drawing if the joint tolerance matters.

2. We weld the trial

The joint is run with the candidate process and fixture concept. Every parameter is recorded, including the ones that failed.

3. Video report

A short clip of the run, macro photos of the cross-section where relevant, and the parameter sheet used.

4. Recommendation and quote

The report ends with the cell concept that fits the result, including the line items that drive the price.

What to send with the parts

  • Material grade and thickness
  • Joint type and gap tolerance from the drawing
  • Surface condition (oiled, galvanized, painted, pickled)
  • Target cycle time and annual volume
  • Any standard the weld has to meet

What you get back

  • Video of the trial run on your samples
  • Parameter sheet: power, speed, focal position, gas, wire feed where used
  • Macro photos or cross-sections for critical joints
  • A written note on what the process can and cannot hold
  • Cell concept and cost drivers for the next step

Shipping and turnaround

Receiving address and typical turnaround are confirmed by email once we know the sample size and the destination country. receiving address and turnaround to be added

Samples are returned on request; otherwise they are kept for the follow-up trial only.

Start a trial weld

Tell us the material, thickness and joint. We reply with the shipping details and what the report will cover.